top of page
Entleersysteme

Emptying systems

Automated and steady emptying of cartridges

Cartridge emptying systems

Our container emptying systems are used to pressing out liquid and pasty dosing media from small containers in order to be able to dose them via dosing valves.
Common sizes for small containers are Euro cartridges with 310 ml or Semco cartridges with 90/180/360/600/900 ml content. axiss has specialized in emptying these small containers.
The container empties are matched to the original container and have a level sensor that outputs the message "cartridge empty" .
A folding mechanism swivels the pneumatic cylinder to the side to enable the cartridge to be changed.
Dispensers, gear pumps, needle dosing valves, etc. can be easily supplied with dosing material via the container emptying systems.

  • The pressing out is performed using a pneumatic cyliner 

  • The ejection force is set pneumatically using the cylinder pressure

  • The cylinder piston can be retracted and extended via a hand lever valve

  • Pneumatic safety switch automatically shuts off the compressed air in case of opening

  • Cartridge can be changed without air trapping  using a bleed valve

  • Sensor emits a 24V signal when the cartridge is empty

Semco cartridge

Pneumatic container emptying for Semco cartridges from 180 to 900 cm³  volume.
The cylinder is slowly moved into the cartridges with the hand lever.

Double Semco

Pneumatic, double container emptying for Semco cartridges from 180 to 900 cm³ volume.
With folding mechanism for changing the cartridges.

Euro cartridge

Cartridge pressure tank for dosing from Euro cartridges 310 ml. The maximum pressurization for these tanks is 0-6 bar.

Cartridge Semco

1K dosing heads
Cartridge stem valve

  • Pneumatic container emptying for Semco cartridges from 180 to 900 cm³.

  • With folding mechanism for changing the cartridges.

  • The cylinder is slowly moved into the cartridge with the hand lever valve.

  • The setting on the manometer changes the pressure on the cartridge and thus the flow rate.

  • Connection options for dosing valves, e.g. B. Dispenser via a material hose.

Technical description

  • Pneumatic cylinders with throttle valves

  • Pneumatic hand lever valve

  • Pressure regulator with manometer 0 - 6 bar

  • Folding unit for changing the cartridges

9110 Behälterentleerung Semco 600ml

9110 emptying system EFD/Semco 600ml

Size approx.:

765 x 255 x 133 mm (L/W/D)

9112 Behälterentleerung Semco 900ml

9112 emptying system EFD/Semco 900ml

Size approx.:

967 x 255 x 130 mm (L/W/D)

9113 Entleersysteme Behälterentleerung

9113 emptying system EFD/Semco 180ml

Size approx.:

647 x 255 x 140 mm (L/W/D)

9114 Behälterentleerung Semco 360 ml_edited

9114 emptying system EFD/Semco 360ml

Size approx.:

970 x 180 x 135 mm (L/W/D)

Double Cartridge Semco

Double tank emptying for Semco cartridges

  • Pneumatic, double container emptying for Semco cartridges from 180 to 900 ml.
    With folding mechanism for changing the cartridges.

  • The container cartridges are mutually released and pressed out via the material switch, reset buttons and control.
    This enables a seamless supply of material to dosing valves, e.g. B. dispensers etc. possible.

  • The currently active container is indicated by a lamp. Connection options for dosing valves via the material hose.

  • The container emptying works independently via an internal control and also sends signals to the outside.

  • The setting on the manometer changes the pressure on the cartridges and thus the flow rate.​

Technical description

  • Pneumatic cylinders with throttle valves

  • Pneumatic hand lever valves

  • Material switch for alternate pressing

  • Pressure regulator with pressure gauges 0 - 6 bar

  • Folding units for changing the cartridges

9117 Entleersysteme behälterentleerung-semco-2x900ml.jpg

9117 emptying system EFD/Semco  2x 900ml

Size approx.:

1308 x 499 x 191 mm (L/W/D)

9119-Behälterentleerung Entleersysteme

9119 emptying system EFD/Semco  2x 600ml

Size approx.:

1108 x 440 x 191 mm (L/W/D)

9121 Entleersysteme Behälterentleerung

9121 emptying system EFD/Semco  2x180ml

Size approx.:

1208 x 500 x 191 mm (L/W/D)

Cartridge EURO

Liquid and pasty media emptying systems - Euro cartridges

  • Cartridge pressure container for dosing from Euro cartridges 310 ml.

  • The maximum pressurization of these containers is 0-6 bar.
    The pressure is applied directly via cartridge plugs or by means of an integrated pneumatic piston.

  • The pressure on the cartridge and thus the flow rate is changed via the setting on the manometer.

 Options

  • Magnetic limit sensor Art. No. 9020-9999

  • Level sensor Art. No. 7002-0004 (with pneumatic piston)

  • 2-way ball valve for venting the cartridge item no. 5012

9010 Behaelterentleerung Eurokartusche.jpg

9010 emptying system EURO 310ml 

Dimensions: 267mm (L) Ø 60mm

9011 Druckzylinder EURO 310_edited.jpg

9011 emptying system EURO 310ml
over flask

Dimensions: 553mm (L) Ø 60mm

9012 Druckbehälter EURO 310_edited.jpg

9012 emptying system EURO 310 ml 

Dimensions: 267mm (L) Ø 60mm

9116 Behälterentleerung Euro 310ml.jpg

9116 emptying system EURO 310 ml 

Size approx.: 576 x 180 x 112 mm (L/W/D)

9040 Behälterentleerung Fett - 400 ml

9040 emptying system     
Fat 400 ml

Cartridge emptying system with quick vent

Dimensions: 435mm (L) Ø 65mm

9050 Druckbehälter Schlauch 600ml

9050 emptying system   hose 600 ml

For material hose 600 ml

Dimensions: 435mm (L) Ø 65mm

bottom of page